Post Offer Free
Jointlaser Technology Limited  

Gold Index: 351

You are here: home  > absorbable suture thread suture PDO

absorbable suture thread suture PDO 

Price: 0.9~7.5 USD 
Payment Terms: T/T,WU 
Place of Origin: Hebei, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Means of Transport: Air
Function: Skin Revitalizer
Age: Others
Gender: Others
Form: Others

verious sizes, good price and shipping cost, CE.

Introduction of PDO thread

 

MAGIK Lift Series are made of PDO (Polydioxanone), it is a thread with no cones, thus no damage to the tissue. 

This is the same thread used in Cardiac and other surgeries as sutures, and thus it is very safe.

 

Aging causes the skin tissue to be thin because the collagen and elastin fibre's break down, which results in sagging skin, deep creases, folds and wrinkles. 

PDO thread reverses the effects of aging.

 

Threads are implanted into the sub-dermal skin and stimulate the production of collagen and the skin becomes firmer, elastic and moisturised. 

The thread dissolves itself in couple of months but the effect last for 12-18 months.

 

The thread can be applied to anywhere on the body, such as a flabby face, cheeks, eyebrows, to prevent eye bags, sagging neck skin, fine lines around Cheeks, 

angle around the mouth, laugh lines, forearm and abdomen, smokers lines and lifting of breast.

 

Indications

 

* Horizontal and vertical forehead wrinkles
* Forehead lift
* Lowered outer eyebrow ends
* Flaccid tissue, sagging eyebrows
* Lower eyelid - bags under the eyes
* Cheeks
* Naso-labial folds (Smile Lines)
* Marionette furrow (marionette lines)
* Sagging cheeks and area under the lower jaw
* Skin furrow on the cheek
* Creased cheeks

 

How to apply thread

 

1. Determine the number of thread and treatment area on the face. 
2. Inject the Anesthetic on the treatment area.
3. Make punching with needle, insert the cannula and then pilfer the inner part of cannula. 
4. Pull the thread out from the needle and Insert the thread (by taking direction the part of thread to be inserted first into the skin) into the cannula which is put on the face. 

(Use a cannula to make tunnel for the thread and insert the thread)
5. Pull out the inserted cannula after treatment done, as holding the end of Cog thread inserted into the face.
6. Press the treatment area in order to get well the thread stuck in the skin.
7. Make Sure thread does not come out from the skin and then, Cut off the remaining part of thread as holding tighten the thread of outside of skin 
8. Press slightly up and down around the punctured skin.

 

Frequently asked questions

 

Is this a painful treatment?
The procedure does not involve pain, bleeding or swelling. The patient may feel slight stinging, similarly to an acupuncture treatment.


When does the effect appear and how long does it last?
The first effects are visible after 2-3 weeks, but considerable improvement appears after 2-3 months, when induction of new collagen begins. The effect is long lasting (up to 2 years).


Therapy schedule
Medical consultation is performed before the treatment, during which the doctor discusses in detail the principle and effects of the treatment. 

The procedure takes approximately one hour (depending on the number of threads used. On average, approximately 40-50 threads are needed for the face).
First, the treated area is anaesthetised with cream, following which the doctor implants threads in the right manner and at the right place.


Post-treatment recommendations
There are no contraindications against returning to the patient's daily activity. Reddening at the thread introduction spots disappear 3-5 hours after the treatment.


Adverse effects
There are no adverse effects or complications. The treatment may be performed throughout the year. sunlight is not a contraindication.

 

 Packaging & Shipping

1. Products are packed in sterile packaging.

2. Products are packed in aluminum again.


bigPhoto
 Ms. Claire

Tel: 86-311-69012012
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Jointlaser Technology Limited [China (Mainland)]


Business Type:Manufacturer
City: Shijiazhuang
Province/State: Hebei
Country/Region: China (Mainland)

You May Like:

Product (5)